Battery Replacement

To Replace Battery of Photon Micro-Light^®:

When you need a replacement battery, we recommend the Eveready CR-2032. To replace, simply use a nail file or small screwdriver and carefully wedge open the groove at the ring end of the light to open case.

To Replace Battery of Photon Micro-Light^®II:

Green, Red, & Yellow:

We recommend the Eveready CR-2032:

Remove four screws from bottom of the Photon with "0" size Phillips-head screwdriver. Flip case over so switch is on top.

Carefully separate top and bottom case.

Remove clear slide switch.

Hold bulb down with one finger and lift lead (wire) just enough to remove batteries.

Install new batteries.

Replace slide switch on slightly raised lead.

Position top case so slide switch extends through hole and close case.

Flip over and replace screws.

Important! Do NOT change bulb leads except for raising enough to replace batteries.

White & Blue:

We recommend the Eveready CR-2016:

Return to Previous Page | Technical Specifications